ORGANIC CONCRETE CLEANER & ETCHING COMPOUND
Enviro Clean & Etch C-30 is a water based, concentrated, non-hazardous, biodegradable cleaner formulated for preparing concrete surfaces for coatings, sealers or stains. Enviro Clean & Etch C-30 is formulated using organic acids and surfactants made from naturally occurring materials, which makes it safer to use and just as effective as traditional hydrochloric or phosphoric based cleaners.
- Exhibits a high degree of reaction equal to traditional acid cleaners without the same hazards of transport, use and personal protection
- Formulated using “green technology” and LEED credit qualification.
- No harmful fumes or objectionable odors provides for trouble free applications on interior projects.
- Concentrated formula allows for easy dilution and cost savings on the job site.
APPLICATIONS: Enviro Clean & Etch C-30 is recommended as a pre-treatment cleaner for OCERA™ Series Stains. It can be used for related decorative concrete including flatwork, stamped and textured concrete, concrete counter tops, concrete masonry units, stucco, mortar, grout, and most any other portland cement based surface.
COMPOSITION: Enviro Clean & Etch C-30 contains water, plant based biodegradable organic salts with proprietary, non-hazardous acid derivatives, and surface wetting agents.
COVERAGE: Enviro Clean & Etch C-30 can be diluted from 1 to 3 parts by volume with water depending on the amount of cleaning required, using a more concentrated solution for heavily contaminated surfaces or to speed etching process. Coverage is approximately 100-200 square feet per gallon after dilution and is dependent on concrete porosity. Coverage will typically be at the higher range for hard troweled or mechanically finished concrete, and at the lower range if concrete is broom finished, very rough or absorptive, or if application conditions are hot or windy.
SHIPPING D.O.T. CLASS: NOT-REGULATED BY D.O.T. ITEM 33880, SUB 2, LTL 55 CONCRETE CLEANER - WATER BASE.
AVAILABLE IN: 1, 5 and 55 Gallon containers.
LEED CREDIT CONSIDERATIONS: Materials and Resources: MR Credit 1.2-Building re-use. Indoor Environmental Quality: EQ Credits 4.2: Low emitting materials (VOC < 25 g/L). MR Credits 5.2: Regional materials- Greater than 20% extracted, processed and manufactured regionally at production location: Lemont, Illinois 60439. 90% ContentHarvested within 500 miles. MR Credits 6.2: Rapidly renewable materials.