Product Search

UREGARD 60

UREGARD 60 is a two part, water-based urethane protective coating for concrete. UREGARD 60 exhibits excellent characteristics for abrasion resistance, flexibility, weathering, and UV stability

TWO COMPONENT WATER-BASED URETHANE CONCRETE COATING

UREGARD 60 is a two‐part, water‐based aliphatic polyurethane protective coating for concrete. UREGARD 60 exhibits excellent characteristics forUREGARD 60 is a two‐part, water‐based aliphatic polyurethane protective coating for concrete. UREGARD 60 exhibits excellent characteristics forabrasion resistance, flexibility, weathering, and UV stability equal to conventional solvent‐based catalyzed urethanes without the associated healthand environmental problems. UREGARD 60 is ideal for architectural concrete flooring projects that require low odor applications with high glossretention, ease of cleaning, and resistance to high foot traffic. Recommended areas of use include hospitals, concrete counter tops, and high trafficretail flooring. UREGARD 60 is also suitable for auto service centers, garage floors, warehouses, laboratories, lobbies, theme parks, cafeterias, orrelated exterior or interior high traffic service or chemical exposure areas.

BENEFITS:

  • Water‐based formulation is ultra‐low VOC (<50 g/L mixed), compliant in all states.
  • Contains no flammable components for safer shipping and application
  • .Ideal use as a topcoat sealer in high traffic areas.
  • Provides high levels of sheen and gloss retention and abrasion resistance along with deep color enhancement.
  • Non‐yellowing aliphatic formula designed for maximum resistance against sun degradation.
  • Provides excellent chemical, oil and stain resistance.
  • Allows easier cleaning of sealed surfaces.
  • Available in both gloss and satin finishes.

SPECIFICATIONS/COMPLIANCES: UREGARD 60 complies with Architectural Coatings requirements and current National AIM specifications forUREGARD 60 complies with Architectural Coatings requirements and current National AIM specifications forconcrete sealers in all states and counties.

DIRECTIONS FOR USE: MIXING: Store UREGARD 60 in an area to bring the material to room temperature before using. This product has a one to twoDIRECTIONS FOR USE: MIXING: Store UREGARD 60 in an area to bring the material to room temperature before using. This product has a one to twomix ratio (by volume), therefore, mix one gallon of Component A with 2 gallons of Component B. Add Component B slowly while mechanicallyagitating Component A at slow speed with a jiffy or squirrel cage mixer, and continue mixing for 2 minutes until the material is uniform and streakfree. Avoid whipping air into the coating at high speed. Improper mixing may contribute to product failure.

Available info for UREGARD 60:
 
Tech Data MSDS

Tech Data

SDS

Concrete Earth

5959 Shallowford Road, Suite 405
Chattanooga, TN 37421 USA

833-345-5625

  

For product or general inquiries:

sales@ConcreteEarth.com

(833) 345-5625         FAX: (423) 269-6550

Corporate Address

5959 Shallowford Road, Suite 405

Chattanooga, TN 37421 USA